High Carbon Ferro Manganese

High Carbon Ferro Manganese

Manganese alloys are mostly used in steel making and foundry activities.

Some 30 % of the manganese used today in steel making is still used for its properties as a deoxidant and a sulphide former.

In this last case it combines with sulphur avoiding the formation of iron sulphides, which sulphides are low melting point phases which become liquid at hot rolling temperatures and which, consequently, generate surface cracking.

The other 70% of the manganese is used purely as an alloying element. Steels usually contain from 0,2% to 2% manganese depending on grades as manganese is the cheapest alloying element among those which enhance some key mechanical properties like strength and toughness. In the specific case of stainless steel it can substitute expensive nickel in some austenitic grades called 200 series.

There are two families of manganese alloys called ferro-manganese (FeMn) and silico-manganese (SiMn).

Silicomanganese adds additional silicon which is a stronger deoxidant.

Nitrogen, boron, titanium, phosphorus are elements which can be controlled depending on requested specification.

A very specific application of refined manganese alloys is a constituent in the coating of welding electrodes.

We can supply two Grade:

High Grade Mn 74: 78

Low Grade Mn  70: 74

Size According to customer requirements.